PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AGH4
AGH4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 1.844 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.219 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-161-2058, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AGH4
NSN: 5330-00-161-2058
FSC: 5330
CAGE: 49200 — PROSPERITY A DIV OF AMETEK INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter1.844 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.219 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-161-2058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AGH4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 1.844 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
APERTURE DIAMETER: 1.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER1.844 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
APERTURE DIAMETER1.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
VG95236-T103Interchangeable
interchangeable cross-reference
interchangeable
AS22520/2-18Interchangeable
interchangeable cross-reference
interchangeable
M22520/2-18Interchangeable
interchangeable cross-reference
interchangeable
730EUGRAYInterchangeable
interchangeable cross-reference
interchangeable
MIL-W-16878/1Interchangeable
interchangeable cross-reference
interchangeable
4297840-384Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AGH4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AGH4?
AGH4 is a GASKET.
What parts can replace AGH4?
There are 11 known substitutes for AGH4: VG95236-T103, AS22520/2-18, M22520/2-18 and 8 more. Substitute compatibility should be verified for your specific system.
Is AGH4 still available?
AGH4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AGH4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026