PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AG7135E
AG7135E ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL INTERNALLY MOLDED-IN REINFORCEMENT, seal_width: 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 3.062 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.125 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-631-6649, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AG7135E
NSN: 5330-00-631-6649
FSC: 5330
CAGE: 0W357 — PDI GROUND SUPPORT SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
seal_width0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter3.062 INCHES NOMINAL IN
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-631-6649
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AG7135E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
CONSTRUCTION: SOLID
•
HOUSING BORE DIAMETER: 3.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
CONSTRUCTIONSOLID
HOUSING BORE DIAMETER3.062 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
SEAL WIDTH0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
6-3-11Interchangeable
interchangeable cross-reference
interchangeable
117511P91Interchangeable
interchangeable cross-reference
interchangeable
129-265Interchangeable
interchangeable cross-reference
interchangeable
543407Interchangeable
interchangeable cross-reference
interchangeable
7-31518Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AG7135E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AG7135E?
AG7135E is a SEAL,PLAIN.
What parts can replace AG7135E?
There are 31 known substitutes for AG7135E: MIL-F-2692, 6-3-11, 117511P91 and 28 more. Substitute compatibility should be verified for your specific system.
Is AG7135E still available?
AG7135E is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AG7135E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026