PartsTable
Technical Data Sheet
Download PDF

AG377000-02 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AG377000-02: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: SILICONE SEALING ELEMENT, hole_diameter: 0.280 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.560 INCHES NOMINAL IN, overall_length: 2.560 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-608-4958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AG377000-02
NSN: 5330-01-608-4958
FSC: 5330 — Packing and Gasket Materials
CAGE: 1NPE1 — AVIATION DEVICES AND ELECTRONIC COMPONENTS, L.L.C. (USA)
SPECIFICATIONS
materialSILICONE SEALING ELEMENT
hole_diameter0.280 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.560 INCHES NOMINAL IN
overall_length2.560 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.500 INCHES NOMINAL IN
bolt_hole_quantity4
end_item_identificationACTS PODS
part_name_assigned_by_controlling_agencyGASKET-DRS-TCS P5 POD ANTENNA
outside_edge_to_bolt_hole_center_distance_along_width0.430 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.430 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.700 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-608-4958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AG377000-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.500 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.700 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.700 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.430 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH2.560 INCHES NOMINAL IN
OVERALL WIDTH2.560 INCHES NOMINAL IN
APERTURE DIAMETER1.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.700 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.700 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.430 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET-DRS-TCS P5 POD ANTENNA
END ITEM IDENTIFICATIONACTS PODS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330PL1592049Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AG377000-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AG377000-02?
AG377000-02 is a GASKET.
What parts can replace AG377000-02?
There is 1 known substitute for AG377000-02: 5330PL1592049. Substitute compatibility should be verified for your specific system.
What is the NSN for AG377000-02?
AG377000-02 is cataloged in the U.S. Government catalog under NSN 5330-01-608-4958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AG377000-02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.