PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AFS2130
AFS2130 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.359 INCHES NOMINAL IN, temp_rating: -65.0 CELSIUS AND 225.0 CELSIUS DEGC, outside_diameter: 2.722 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-718-2081, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AFS2130
NSN: 5330-00-718-2081
FSC: 5330
CAGE: 20076 — TITAN WHEEL CORPORATION OF ILLINOIS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.359 INCHES NOMINAL IN
temp_rating-65.0 CELSIUS AND 225.0 CELSIUS DEGC
outside_diameter2.722 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.718 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-718-2081
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AFS2130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.718 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.722 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
TEMP RATING: -65.0 CELSIUS AND 225.0 CELSIUS DEGC
•
SEAL WIDTH: 0.359 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.718 INCHES NOMINAL IN
OUTSIDE DIAMETER2.722 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
TEMP RATING-65.0 CELSIUS AND 225.0 CELSIUS DEGC
SEAL WIDTH0.359 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
02082558Interchangeable
interchangeable cross-reference
interchangeable
208CFFInterchangeable
interchangeable cross-reference
interchangeable
43208PPInterchangeable
interchangeable cross-reference
interchangeable
GGG-D-296 TY1SEAInterchangeable
interchangeable cross-reference
interchangeable
31181Interchangeable
interchangeable cross-reference
interchangeable
23220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AFS2130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AFS2130?
AFS2130 is a SEAL,PLAIN ENCASED.
What parts can replace AFS2130?
There are 23 known substitutes for AFS2130: 02082558, 208CFF, 43208PP and 20 more. Substitute compatibility should be verified for your specific system.
Is AFS2130 still available?
AFS2130 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AFS2130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026