PartsTable
Technical Data Sheet
Download PDF

AFP164-12 — SLEEVE,CLINCH,TUBE FITTING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AFP164-12: SLEEVE,CLINCH,TUBE FITTING.

The SLEEVE,CLINCH,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213, flange_width: 0.120 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN, style_designator: FLARELESS, seat_angle_in_deg: 35.0, surface_treatment: CADMIUM. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-043-8426, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AFP164-12
NSN: 4730-01-043-8426
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 30974 — AEROFIT, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1213
flange_width0.120 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
style_designatorFLARELESS
seat_angle_in_deg35.0
surface_treatmentCADMIUM
casehardening_indicatorCASEHARDENED
flange_outside_diameter0.938 INCHES NOMINAL IN
sleeve_outside_diameter0.836 INCHES NOMINAL IN
specification/standard_data81205-BACS13AP MANUFACTURERS SPECIFICATION
hose/tube_outside_diameter_for_which_designed0.750 INCHES NOMINAL IN
NSN4730-01-043-8426
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AFP164-12 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAT ANGLE IN DEG: 35.0
•
STYLE DESIGNATOR: FLARELESS
•
SLEEVE OUTSIDE DIAMETER: 0.836 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81205-BACS13AP MANUFACTURERS SPECIFICATION
•
CASEHARDENING INDICATOR: CASEHARDENED
•
SURFACE TREATMENT: CADMIUM
•
FLANGE WIDTH: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEAT ANGLE IN DEG35.0
STYLE DESIGNATORFLARELESS
OVERALL LENGTH0.750 INCHES NOMINAL IN
SLEEVE OUTSIDE DIAMETER0.836 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BACS13AP MANUFACTURERS SPECIFICATION
CASEHARDENING INDICATORCASEHARDENED
SURFACE TREATMENTCADMIUM
FLANGE WIDTH0.120 INCHES NOMINAL IN
MATERIALSTEEL COMP 1213
FLANGE OUTSIDE DIAMETER0.938 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
DB0S13AP-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACS13APReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AFP164-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AFP164-12?
AFP164-12 is a SLEEVE,CLINCH,TUBE FITTING.
What parts can replace AFP164-12?
There are 2 known substitutes for AFP164-12: DB0S13AP-12, BACS13AP. Substitute compatibility should be verified for your specific system.
What is the NSN for AFP164-12?
AFP164-12 is cataloged in the U.S. Government catalog under NSN 4730-01-043-8426. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AFP164-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.