PartsTable
Technical Data Sheet
Download PDF

AFP1000P-10H — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AFP1000P-10H: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, nut_height: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, thread_class: 3B, thread_series: UNJS, special_features: OPTIONAL 2 LOCKWIRE HOLES 180 DEGREES APART. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-302-4392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AFP1000P-10H
NSN: 5310-01-302-4392
FSC: 5310 — Nuts and Washers
CAGE: 30974 — AEROFIT, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
nut_height0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
thread_class3B
thread_seriesUNJS
special_featuresOPTIONAL 2 LOCKWIRE HOLES 180 DEGREES APART
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats1.125 INCHES NOMINAL IN
nominal_thread_size0.843 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch18
NSN5310-01-302-4392
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AFP1000P-10H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 1.125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNJS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.843 INCHES IN
•
NUT HEIGHT: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS1.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNJS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.843 INCHES IN
NUT HEIGHT0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
SPECIAL FEATURESOPTIONAL 2 LOCKWIRE HOLES 180 DEGREES APART
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
AP321P-10HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
50601P-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
R44118P-10HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AFP1000P-10H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AFP1000P-10H?
AFP1000P-10H is a NUT,PLAIN,HEXAGON.
What parts can replace AFP1000P-10H?
There are 3 known substitutes for AFP1000P-10H: AP321P-10H, 50601P-10, R44118P-10H. Substitute compatibility should be verified for your specific system.
What is the NSN for AFP1000P-10H?
AFP1000P-10H is cataloged in the U.S. Government catalog under NSN 5310-01-302-4392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AFP1000P-10H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.