The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5056 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, fastener_length: 0.752 INCHES MINIMUM AND 0.772 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5320-01-085-1756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 5056 SLEEVE |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| fastener_length | 0.752 INCHES MINIMUM AND 0.772 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | CADMIUM AND CHROMATE STEM |
| head_major_diameter | 0.357 INCHES MAXIMUM IN |
| material_document_and_classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| surface_treatment_document_and_classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| NSN | 5320-01-085-1756 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | STEEL COMP 8740 STEM |
| SURFACE TREATMENT | CADMIUM AND CHROMATE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES STEM |
| SURFACE TREATMENT | CHROMATE SLEEVE |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |