AF1090O1E5C8: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7050 OVERALL, head_style: OVAL COUNTERSUNK, shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, shank_diameter: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, fastener_length: 0.500 INCHES NOMINAL IN, countersink_angle: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-468-2804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 7050 OVERALL |
| head_style | OVAL COUNTERSUNK |
| shank_style | STRAIGHT W/RADIUS CHAMFERED TIP |
| shank_diameter | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| fastener_length | 0.500 INCHES NOMINAL IN |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | ANODIZE AND ALUMINUM OVERALL |
| head_major_diameter | 0.209 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| end_item_identification | C-17 AIRCRAFT |
| material_document_and_classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| part_name_assigned_by_controlling_agency | RIVET,SOLID-100 DEGREE FLUSH CROWN SHEAR HEAD |
| surface_treatment_document_and_classification | MIL-A-8625,TYPE1,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NSN | 5320-01-468-2804 |
| SHANK DIAMETER | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.500 INCHES NOMINAL IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE1,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HEAD STYLE | OVAL COUNTERSUNK |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SPECIAL FEATURES | DEBURR AND BREAK ALL EDGES .005-.015;.001 SHANK DIAMETER INCREASE PERMISSABLE WITHIN 100 OF BASE OF HEAD;HEAD COCKING ANGLE OF RIVET HEAD RELATIVE TO AXIS OF RIVET 1/2IN MAX;APPROXIMATE MATERIAL FOR FULL UPSET OF HEAD;CLOSED DIE CONFIGURATION REQUIRED;NO SHARP EDGES OR BURRS ON RIVET;DIMENTIONS APPLY AFTER COATING IN |
| SURFACE TREATMENT | ANODIZE AND ALUMINUM OVERALL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RIVET,SOLID-100 DEGREE FLUSH CROWN SHEAR HEAD |