AF007M5-6: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, heat_treatment: ANNEALED OVERALL, shank_diameter: 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, shear_strength: 49000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-516-0359, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 400 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| shank_style | STRAIGHT W/RADIUS CHAMFERED TIP |
| heat_treatment | ANNEALED OVERALL |
| shank_diameter | 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| shear_strength | 49000 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| head_major_diameter | 0.2384 INCHES MINIMUM AND 0.2467 INCHES MAXIMUM IN |
| material_document_and_classification | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| NSN | 5320-01-516-0359 |
| SHANK DIAMETER | 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| HEAT TREATMENT | ANNEALED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SHEAR STRENGTH | 49000 SINGLE POUNDS PER SQUARE INCH |
| MATERIAL | NICKEL ALLOY 400 OVERALL |
| HEAD MAJOR DIAMETER | 0.2384 INCHES MINIMUM AND 0.2467 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.