PartsTable
Technical Data Sheet
Download PDF

AEW13X031000GD8LX1 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AEW13X031000GD8LX1: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1059 OVERALL, hole_diameter: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, outside_diameter: 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-497-0233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AEW13X031000GD8LX1
NSN: 5310-01-497-0233
FSC: 5310 — Nuts and Washers
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialSTEEL COMP 1059 OVERALL
hole_diameter0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
outside_diameter0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
end_item_identification1025-01-026-6648
material_document_and_classificationSAEJ412, COMP 1059, G10590 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-497-0233
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AEW13X031000GD8LX1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ412, COMP 1059, G10590 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1059 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONSAEJ412, COMP 1059, G10590 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATION1025-01-026-6648
MATERIALSTEEL COMP 1059 OVERALL
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
W211NAG0031NN038NNPF1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AEW13X031000GD8LX1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AEW13X031000GD8LX1?
AEW13X031000GD8LX1 is a WASHER,LOCK.
What parts can replace AEW13X031000GD8LX1?
There is 1 known substitute for AEW13X031000GD8LX1: W211NAG0031NN038NNPF1. Substitute compatibility should be verified for your specific system.
What is the NSN for AEW13X031000GD8LX1?
AEW13X031000GD8LX1 is cataloged in the U.S. Government catalog under NSN 5310-01-497-0233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AEW13X031000GD8LX1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.