PartsTable
Technical Data Sheet
Download PDF

AEW07X25R000SE4A11 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AEW07X25R000SE4A11: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, hole_diameter: 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, outside_diameter: 0.487 INCHES NOMINAL IN, special_features: FINISH IS PLAIN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-571-3922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AEW07X25R000SE4A11
NSN: 5310-01-571-3922
FSC: 5310 — Nuts and Washers
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
hole_diameter0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
outside_diameter0.487 INCHES NOMINAL IN
special_featuresFINISH IS PLAIN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.062 INCHES NOMINAL IN
end_item_identificationMRAP RG-33
NSN5310-01-571-3922
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AEW07X25R000SE4A11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.487 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 316 OVERALL
•
HOLE DIAMETER: 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.487 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SPECIAL FEATURESFINISH IS PLAIN
END ITEM IDENTIFICATIONMRAP RG-33
MATERIALSTEEL COMP 316 OVERALL
HOLE DIAMETER0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AEW07X25R000SE4A11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AEW07X25R000SE4A11?
AEW07X25R000SE4A11 is a WASHER,LOCK.
What is the NSN for AEW07X25R000SE4A11?
AEW07X25R000SE4A11 is cataloged in the U.S. Government catalog under NSN 5310-01-571-3922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AEW07X25R000SE4A11