PartsTable
Technical Data Sheet
Download PDF

AEW01X500000BD6GX1 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AEW01X500000BD6GX1: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.500 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, end_item_identification: 4930-01-691-6188, TANK AND PUMP UNIT,FUEL DISPENSING,TRUC, part_name_assigned_by_controlling_agency: WASHER, LOCK. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-696-7959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AEW01X500000BD6GX1
NSN: 5310-01-696-7959
FSC: 5310 — Nuts and Washers
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.500 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
end_item_identification4930-01-691-6188, TANK AND PUMP UNIT,FUEL DISPENSING,TRUC
part_name_assigned_by_controlling_agencyWASHER, LOCK
NSN5310-01-696-7959
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AEW01X500000BD6GX1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, LOCK
END ITEM IDENTIFICATION4930-01-691-6188, TANK AND PUMP UNIT,FUEL DISPENSING,TRUC
MATERIALSTEEL OVERALL
HOLE DIAMETER0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
ASME B18.24Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AEW01X500000BD6GX1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AEW01X500000BD6GX1?
AEW01X500000BD6GX1 is a WASHER,LOCK.
What parts can replace AEW01X500000BD6GX1?
There is 1 known substitute for AEW01X500000BD6GX1: ASME B18.24. Substitute compatibility should be verified for your specific system.
What is the NSN for AEW01X500000BD6GX1?
AEW01X500000BD6GX1 is cataloged in the U.S. Government catalog under NSN 5310-01-696-7959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AEW01X500000BD6GX1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.