PartsTable
Technical Data Sheet
Download PDF

AES01F250A75AW9A96 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AES01F250A75AW9A96: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: PLASTIC LOCKING FEATURE, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN, fastener_length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-280-5703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AES01F250A75AW9A96
NSN: 5305-01-280-5703
FSC: 5305 — Screws
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialPLASTIC LOCKING FEATURE
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
fastener_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE FASTENER
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
thread_series_designatorUNF
NSN5305-01-280-5703
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AES01F250A75AW9A96 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
•
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
THREAD LENGTH0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
SURFACE TREATMENTZINC AND CHROMATE FASTENER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 5
ASME B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90727-13LReference document
Same NSN cross-reference
Reference document — Secondary reference
5305012805703Reference document
Same NSN cross-reference
Reference document — Secondary reference
B1821BH025F175LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AES01F250A75AW9A96?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AES01F250A75AW9A96?
AES01F250A75AW9A96 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace AES01F250A75AW9A96?
There are 5 known substitutes for AES01F250A75AW9A96: ASME B18.2.1, FF-S-85, MS90727-13L and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AES01F250A75AW9A96?
AES01F250A75AW9A96 is cataloged in the U.S. Government catalog under NSN 5305-01-280-5703. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AES01F250A75AW9A96

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.