PartsTable
Technical Data Sheet
Download PDF

AEN04C500000AZ6A91 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AEN04C500000AZ6A91: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-651-0909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AEN04C500000AZ6A91
NSN: 5310-01-651-0909
FSC: 5310 — Nuts and Washers
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeFLAT
end_item_identification2320-01-552-7782
NSN5310-01-651-0909
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AEN04C500000AZ6A91 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
END ITEM IDENTIFICATION2320-01-552-7782
MATERIALSTEEL OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 1
12423317Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AEN04C500000AZ6A91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AEN04C500000AZ6A91?
AEN04C500000AZ6A91 is a NUT,PLAIN,HEXAGON.
What parts can replace AEN04C500000AZ6A91?
There is 1 known substitute for AEN04C500000AZ6A91: 12423317. Substitute compatibility should be verified for your specific system.
What is the NSN for AEN04C500000AZ6A91?
AEN04C500000AZ6A91 is cataloged in the U.S. Government catalog under NSN 5310-01-651-0909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AEN04C500000AZ6A91