AE712152-002 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

AE712152-002: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3A FIRST END A, connection_type: THREADED EXTERNAL HOSE FIRST END, inside_diameter: 1.485 INCHES MINIMUM AND 1.574 INCHES MAXIMUM IN, connection_style: GASKET SEAL FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-498-2236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AE712152-002

NSN: 4720-01-498-2236
FSC: 4720 — Hose and Flexible Tubing
CAGE: 1P322 — EATON-AEROQUIP INC. (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES SECOND END
temp_rating	-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	3A FIRST END A
connection_type	THREADED EXTERNAL HOSE FIRST END
inside_diameter	1.485 INCHES MINIMUM AND 1.574 INCHES MAXIMUM IN
connection_style	GASKET SEAL FIRST END
outside_diameter	2.188 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND FIRST END
features_provided	INTERNAL SUPPORT
operating_pressure	150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	600.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	2.750 INCHES FIRST END IN
NSN	4720-01-498-2236

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 90.0 DEGREES SECOND END

•

MEASURING METHOD AND LENGTH: 77.750 INCHES NOMINAL WORKING IN

•

TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 20.000 INCHES IN

•

CONNECTION STYLE: GASKET SEAL FIRST END

•

END CONNECTION DESIGN: ELBOW SECOND END

•

LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER COMPOSITION

TECHNICAL CHARACTERISTICS

FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	77.750 INCHES NOMINAL WORKING IN
TEMP RATING	-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	20.000 INCHES IN
CONNECTION STYLE	GASKET SEAL FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER COMPOSITION
CONNECTION TYPE	THREADED EXTERNAL HOSE FIRST END
CROSS-SECTIONAL SHAPE STYLE	ROUND

SUBSTITUTES & CROSS-REFERENCES 3

C21121-13Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1977747Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

177574-4 ITEM 44Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AE712152-002?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AE712152-002?

AE712152-002 is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace AE712152-002?

There are 3 known substitutes for AE712152-002: C21121-13, 1977747, 177574-4 ITEM 44. Substitute compatibility should be verified for your specific system.

What is the NSN for AE712152-002?

AE712152-002 is cataloged in the U.S. Government catalog under NSN 4720-01-498-2236. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AE712152-002 — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — AE712152-002