AE709250-1 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

AE709250-1: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 12.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.212 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-356-8657, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AE709250-1

NSN: 4720-01-356-8657
FSC: 4720 — Hose and Flexible Tubing
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES SECOND END
seat_angle	12.0 DEGREES FIRST END
temp_rating	-40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	3B FIRST END
connection_type	THREADED INTERNAL TUBE FIRST END
inside_diameter	0.212 INCHES MINIMUM IN
connection_style	SWIVEL NUT, FLARELESS FIRST END
outside_diameter	0.640 INCHES MAXIMUM IN
special_features	HOSE AND TUBE ASSY.,1/4 IN.CRES 304 TUBING X 0.035 WALL X 10.920 LONG INCLUDED IN OVERALL LENGTH OF ASSEMBLY IN
thread_direction	RIGHT-HAND FIRST END
features_provided	ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
operating_pressure	3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN	4720-01-356-8657

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 90.0 DEGREES SECOND END

•

MEASURING METHOD AND LENGTH: 41.300 INCHES NOMINAL OVERALL IN

•

TEMP RATING: -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 1.500 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT, FLARELESS SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	41.300 INCHES NOMINAL OVERALL IN
TEMP RATING	-40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	1.500 INCHES IN
CONNECTION STYLE	SWIVEL NUT, FLARELESS SECOND END
CONNECTION STYLE	SWIVEL NUT, FLARELESS FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION TYPE	THREADED INTERNAL TUBE SECOND END

OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025

SUBSTITUTES & CROSS-REFERENCES 2

71B160031Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

71B160031-103Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AE709250-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AE709250-1?

AE709250-1 is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace AE709250-1?

There are 2 known substitutes for AE709250-1: 71B160031, 71B160031-103. Substitute compatibility should be verified for your specific system.

What is the NSN for AE709250-1?

AE709250-1 is cataloged in the U.S. Government catalog under NSN 4720-01-356-8657. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AE709250-1 — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — AE709250-1