PartsTable
Technical Data Sheet
Download PDF

AE7013124E0050 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

AE7013124E0050: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 12.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.220 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-239-2285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE7013124E0050
NSN: 4720-01-239-2285
FSC: 4720 — Hose and Flexible Tubing
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle12.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.220 INCHES NOMINAL IN
connection_styleSWIVEL NUT, FLARELESS SECOND END
outside_diameter0.530 INCHES NOMINAL IN
special_featuresMATERIAL FOR INNER TUBE IS SPECIAL ELASTOMER SYTHETIC RUBBER; NUT AND NIPPLE MATERIAL IS AMS 5024; SOCKET MATERIAL IS AMS 4117 (6061)
thread_directionRIGHT-HAND SECOND END
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure6000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-239-2285
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE7013124E0050 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES SECOND END
•
MEASURING METHOD AND LENGTH: 5.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT, FLARELESS SECOND END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH5.000 INCHES NOMINAL OVERALL IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
CONNECTION STYLESWIVEL NUT, FLARELESS SECOND END
CONNECTION STYLESWIVEL NUT, FLARELESS FIRST END
END CONNECTION DESIGNELBOW SECOND END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED POLYESTER CORD
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025
SUBSTITUTES & CROSS-REFERENCES 1
7-311830109-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AE7013124E0050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE7013124E0050?
AE7013124E0050 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AE7013124E0050?
There is 1 known substitute for AE7013124E0050: 7-311830109-3. Substitute compatibility should be verified for your specific system.
What is the NSN for AE7013124E0050?
AE7013124E0050 is cataloged in the U.S. Government catalog under NSN 4720-01-239-2285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE7013124E0050

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.