PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AE370-48
AE370-48 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,TUBE TO HOSE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, vacuum_in_torr: 457.2, inside_diameter: 3.000 INCHES NOMINAL IN, outside_diameter: 3.594 INCHES NOMINAL IN, features_provided: ELECTROSTATIC DISCHARGE CAPABILITY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-624-4060, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE370-48
NSN: 4720-00-624-4060
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
vacuum_in_torr457.2
inside_diameter3.000 INCHES NOMINAL IN
outside_diameter3.594 INCHES NOMINAL IN
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedHYDRAULIC FLUID, PHOSPHATE-ESTER BASE AND HYDRAULIC FLUID, SILICATE-ESTER BASE AND GAS, NATURAL AND OIL, LUBRICATING, DIESTER BASE AND AIR AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
hydrostatic_test_pressure400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
NSN4720-00-624-4060
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE370-48 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 33.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID, PHOSPHATE-ESTER BASE AND HYDRAULIC FLUID, SILICATE-ESTER BASE AND GAS, NATURAL AND OIL, LUBRICATING, DIESTER BASE AND AIR AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
•
VACUUM IN TORR: 457.2
•
MATERIAL: RUBBER SYNTHETIC TUBE
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS33.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID, PHOSPHATE-ESTER BASE AND HYDRAULIC FLUID, SILICATE-ESTER BASE AND GAS, NATURAL AND OIL, LUBRICATING, DIESTER BASE AND AIR AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
VACUUM IN TORR457.2
MATERIALRUBBER SYNTHETIC TUBE
NONDEFINITIVE SPEC/STD DATA48 SIZE
HYDROSTATIC TEST PRESSURE400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
2651-10Interchangeable
interchangeable cross-reference
interchangeable
73917-32X1ITEM8Interchangeable
interchangeable cross-reference
interchangeable
M24135/10-10Interchangeable
interchangeable cross-reference
interchangeable
1332Interchangeable
interchangeable cross-reference
interchangeable
D300R/5Interchangeable
interchangeable cross-reference
interchangeable
81AD1679-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AE370-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE370-48?
AE370-48 is a ADAPTER,STRAIGHT,TUBE TO HOSE.
What parts can replace AE370-48?
There are 30 known substitutes for AE370-48: 2651-10, 73917-32X1ITEM8, M24135/10-10 and 27 more. Substitute compatibility should be verified for your specific system.
Is AE370-48 still available?
AE370-48 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE370-48

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026