PartsTable
Technical Data Sheet
Download PDF

AE2460000E0134 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

AE2460000E0134: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.225 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-003-8817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE2460000E0134
NSN: 4720-00-003-8817
FSC: 4720 — Hose and Flexible Tubing
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.225 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.390 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.438 INCHES FIRST END IN
NSN4720-00-003-8817
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE2460000E0134 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 13.500 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 1.500 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.390 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH13.500 INCHES NOMINAL OVERALL IN
TEMP RATING-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS1.500 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.390 INCHES NOMINAL IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY
SUBSTITUTES & CROSS-REFERENCES 7
AS1339Reference document
Same NSN cross-reference
Reference document — Secondary reference
GH12C4C0134Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS1339Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
171001-4CR-0134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
000AE50-4-0134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-H-38360Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AE2460000E0134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE2460000E0134?
AE2460000E0134 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AE2460000E0134?
There are 7 known substitutes for AE2460000E0134: AS1339, GH12C4C0134, SAE-AS1339 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AE2460000E0134?
AE2460000E0134 is cataloged in the U.S. Government catalog under NSN 4720-00-003-8817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE2460000E0134

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.