PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AE1813PC3
AE1813PC3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 1.000 INCHES NOMINAL IN, housing_bore_diameter: 15.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 13.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-4991, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE1813PC3
NSN: 5330-00-154-4991
FSC: 5330
CAGE: 79292 — SCHINDLER ELEVATOR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width1.000 INCHES NOMINAL IN
housing_bore_diameter15.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter13.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-4991
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AE1813PC3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 13.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 15.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH1.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER13.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER15.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
WC73544Interchangeable
interchangeable cross-reference
interchangeable
3721Interchangeable
interchangeable cross-reference
interchangeable
F73544Interchangeable
interchangeable cross-reference
interchangeable
AW24Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-636Interchangeable
interchangeable cross-reference
interchangeable
A-A-1359Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AE1813PC3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE1813PC3?
AE1813PC3 is a SEAL,PLAIN ENCASED.
What parts can replace AE1813PC3?
There are 12 known substitutes for AE1813PC3: WC73544, 3721, F73544 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AE1813PC3?
AE1813PC3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-4991. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE1813PC3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026