PartsTable
Technical Data Sheet
Download PDF

AE1010010H-21 — HOSE ASSEMBLY,AIR BREATHING

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

AE1010010H-21: HOSE ASSEMBLY,AIR BREATHING.

The HOSE ASSEMBLY,AIR BREATHING is a the manufacturer industrial component. Key specifications include material: PLASTIC SINGLE PLY, wall_thickness: 0.043 INCHES NOMINAL IN, connection_type: THREADED FIRST END, operating_pressure: 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS, cross-sectional_shape_style: ROUND, measuring_method_and_length: 21.000 INCHES NOMINAL OVERALL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-038-2094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE1010010H-21
NSN: 4720-01-038-2094
NIINs: 010382094, 013727739
FSC: 4720 — Hose and Flexible Tubing
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialPLASTIC SINGLE PLY
wall_thickness0.043 INCHES NOMINAL IN
connection_typeTHREADED FIRST END
special_featuresCONNECTION TYPE: GROUND JOINT EXTERNALLY THREADED TAILPIECE W/UNION NUT FIRST END; MATERIAL: PLASTIC TETRAFLUOROETHYLENE SINGLE PLY STEEL CORROSION RESISTING REINFORCING WIRE
operating_pressure500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
cross-sectional_shape_styleROUND
measuring_method_and_length21.000 INCHES NOMINAL OVERALL IN
NSN4720-01-038-2094
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE1010010H-21 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 21.000 INCHES NOMINAL WORKING IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
MINIMUM INSIDE BENDING RADIUS: 4.625 INCHES IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.593 INCHES NOMINAL BOTH ENDS IN
•
OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
NOMINAL THREAD SIZE: 0.750 INCHES SECOND END IN
•
SPECIFICATION/STANDARD DATA: 96906-MS24548 GOVERNMENT STANDARD
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH21.000 INCHES NOMINAL WORKING IN
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
MINIMUM INSIDE BENDING RADIUS4.625 INCHES IN
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.593 INCHES NOMINAL BOTH ENDS IN
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
NOMINAL THREAD SIZE0.750 INCHES SECOND END IN
SPECIFICATION/STANDARD DATA96906-MS24548 GOVERNMENT STANDARD
INSIDE DIAMETER0.391 INCHES NOMINAL BOTH ENDS IN
SPECIAL FEATURESCONNECTION TYPE: THREADED INTERNAL TUBE 1ST END; THREAD DIRECTION: RIGHT-HAND 1ST END; END CONNECTION DESIGN: STRAIGHT 1ST END; BURST TEST PRESSURE: 8000.0 PSI; LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE; HYDROSTATIC TEST PRESSURE: 3000.0 PSI; INSIDE SURFACE CONDITION: SMOOTH; CONNECTION STYLE: SWIVEL NUT FLARE 1ST END; SEAT ANGLE: 37.0 DEG. 1ST END; OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
SUBSTITUTES & CROSS-REFERENCES 7
124392-8CR-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
124392-8S0210Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-PRF-26626Reference document
Same NSN cross-reference
Reference document — Identification reference
MS24548-8-0210Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-H-26626Reference document
Same NSN cross-reference
Reference document — Secondary reference
M26626-8-21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AE1010010H-21?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE1010010H-21?
AE1010010H-21 is a HOSE ASSEMBLY,AIR BREATHING.
What parts can replace AE1010010H-21?
There are 7 known substitutes for AE1010010H-21: 124392-8CR-21, 124392-8S0210, MIL-PRF-26626 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AE1010010H-21?
AE1010010H-21 is cataloged in the U.S. Government catalog under NSN 4720-01-038-2094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE1010010H-21

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.