PartsTable
Technical Data Sheet
Download PDF

AE1001766G0200 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

AE1001766G0200: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 460.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.297 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-730-2748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE1001766G0200
NSN: 4720-00-730-2748
FSC: 4720 — Hose and Flexible Tubing
CAGE: 45X75 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 460.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.297 INCHES MINIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.632 INCHES MAXIMUM IN
special_featuresEXTERNAL PROTECTION TYPE AND LOCATION- OVERALL CHAFE GUARD, CHLOROPRENE RUBBER TUBING, INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4720-00-730-2748
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE1001766G0200 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 22.250 INCHES NOMINAL WORKING IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 460.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATE FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH22.250 INCHES NOMINAL WORKING IN
TEMP RATING-65.0 FAHRENHEIT AND 460.0 FAHRENHEIT SINGLE RESPONSE DEGF
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING PASSIVATE FIRST END
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.632 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
646605-6-0200Reference document
Same NSN cross-reference
Reference document — Secondary reference
646605Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AE1001766G0200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE1001766G0200?
AE1001766G0200 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AE1001766G0200?
There are 2 known substitutes for AE1001766G0200: 646605-6-0200, 646605. Substitute compatibility should be verified for your specific system.
What is the NSN for AE1001766G0200?
AE1001766G0200 is cataloged in the U.S. Government catalog under NSN 4720-00-730-2748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE1001766G0200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.