PartsTable
Technical Data Sheet
Download PDF

ADLF 04C18 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

ADLF 04C18: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OUTER LAYER, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.6095 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-336-9044, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ADLF 04C18
NSN: 3120-01-336-9044
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OUTER LAYER
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length0.6095 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.2505 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
body_outside_diameter0.3755 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN
flange_outside_diameter0.7300 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
NSN3120-01-336-9044
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ADLF 04C18 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
FLANGE OUTSIDE DIAMETER: 0.7300 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER0.7300 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.3755 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 3
M81934/2-04C018Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS81934Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81934/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy ADLF 04C18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ADLF 04C18?
ADLF 04C18 is a BEARING,SLEEVE.
What parts can replace ADLF 04C18?
There are 3 known substitutes for ADLF 04C18: M81934/2-04C018, AS81934, MIL-B-81934/2. Substitute compatibility should be verified for your specific system.
What is the NSN for ADLF 04C18?
ADLF 04C18 is cataloged in the U.S. Government catalog under NSN 3120-01-336-9044. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ADLF 04C18