PartsTable
Technical Data Sheet
Download PDF

ADD6416A — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

ADD6416A: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.3765 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN, material: STEEL OVERALL, corner_shape: CHAMFERED FIRST OUTSIDE CORNER, outside_diameter: 0.7190 INCHES NOMINAL IN, style_designator: ROUND, features_provided: CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-661-4866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ADD6416A
NSN: 3120-00-661-4866
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 82796 — COLTEC INDUSTRIES INC. DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE (USA)
SPECIFICATIONS
diameter0.3765 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
materialSTEEL OVERALL
corner_shapeCHAMFERED FIRST OUTSIDE CORNER
outside_diameter0.7190 INCHES NOMINAL IN
style_designatorROUND
features_providedCASEHARDENED
overall_thickness0.1250 INCHES NOMINAL IN
surface_conditionGROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-00-661-4866
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ADD6416A · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: CHAMFERED FIRST OUTSIDE CORNER
•
OVERALL THICKNESS: 0.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 0.3765 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
•
SURFACE CONDITION: GROUND
TECHNICAL CHARACTERISTICS
CORNER SHAPECHAMFERED FIRST OUTSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
OVERALL THICKNESS0.1250 INCHES NOMINAL IN
STYLE DESIGNATORROUND
DIAMETER0.3765 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
SURFACE CONDITIONGROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER0.7190 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
16101153Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ADD6416A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ADD6416A?
ADD6416A is a BEARING,WASHER,THRUST.
What parts can replace ADD6416A?
There is 1 known substitute for ADD6416A: 16101153. Substitute compatibility should be verified for your specific system.
What is the NSN for ADD6416A?
ADD6416A is cataloged in the U.S. Government catalog under NSN 3120-00-661-4866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ADD6416A