PartsTable
Technical Data Sheet
Download PDF

AD9371-1 PIECE 168 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AD9371-1 PIECE 168: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 252.000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, nondefinitive_spec/std_data: SC512 CLASS, material_document_and_classification: MIL-STD-417, GRADE SC512 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-258-0344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AD9371-1 PIECE 168
NSN: 5330-01-258-0344
FSC: 5330 — Packing and Gasket Materials
CAGE: 47750 — PLAINVILLE ELECTRICAL PRODUCTS COMPANY, THE DBA PLAINVILLE ELECTRICAL PRODUCTS (USA)
SPECIFICATIONS
length252.000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
nondefinitive_spec/std_dataSC512 CLASS
material_document_and_classificationMIL-STD-417, GRADE SC512 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5330-01-258-0344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AD9371-1 PIECE 168 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 252.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, GRADE SC512 MIL SPEC SINGLE MATERIAL RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: SC512 CLASS
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
LENGTH252.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417, GRADE SC512 MIL SPEC SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATASC512 CLASS
MATERIALRUBBER CHLOROPRENE CLASS CR
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
MIL-R-3065Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AD9371-1 PIECE 168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AD9371-1 PIECE 168?
AD9371-1 PIECE 168 is a RUBBER STRIP.
What parts can replace AD9371-1 PIECE 168?
There is 1 known substitute for AD9371-1 PIECE 168: MIL-R-3065. Substitute compatibility should be verified for your specific system.
What is the NSN for AD9371-1 PIECE 168?
AD9371-1 PIECE 168 is cataloged in the U.S. Government catalog under NSN 5330-01-258-0344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AD9371-1 PIECE 168