PartsTable / COMPONENT / AD792
AD792
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, housing_bore_diameter: 0.999 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.438 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6403, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AD792
NSN: 5330-00-291-6403 FSC: 5330 CAGE: 97947 — LISTER PETTER AMERICAS INCORPORATED (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN housing_bore_diameter 0.999 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.438 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-291-6403
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: AD792
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 0.999 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEALING ELEMENT STYLE: ANGULAR
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN HOUSING BORE DIAMETER 0.999 INCHES NOMINAL IN CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEALING ELEMENT STYLE ANGULAR MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
4310 Interchangeable interchangeable cross-reference
interchangeable
123-39 Interchangeable interchangeable cross-reference
interchangeable
254-102 Interchangeable interchangeable cross-reference
interchangeable
1227-4310 Interchangeable interchangeable cross-reference
interchangeable
020-007-003 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy AD792?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AD792?
AD792 is a SEAL,PLAIN ENCASED.
What parts can replace AD792?
There are 22 known substitutes for AD792: 4310, 123-39, 254-102 and 19 more. Substitute compatibility should be verified for your specific system.
Is AD792 still available?
AD792 is currently cancelled.