The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: GLASS AND RUBBER SILICONE CLASS Q OVERALL, temp_rating: -65.00 FAHRENHEIT AND 450.00 FAHRENHEIT DEGF, cross-sectional_length: 2.250 INCHES NOMINAL IN, end_item_identification: F15S ACFT, cross-sectional_shape_style: SPHERICAL, cross_section_inside_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-406-6803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AD1199-8-9
NSN:5330-01-406-6803 FSC:5330 — Packing and Gasket Materials CAGE:21868 — HBD INDUSTRIES, INC DIV HBD/THERMOID INC (USA)
SPECIFICATIONS
material
GLASS AND RUBBER SILICONE CLASS Q OVERALL
temp_rating
-65.00 FAHRENHEIT AND 450.00 FAHRENHEIT DEGF
cross-sectional_length
2.250 INCHES NOMINAL IN
end_item_identification
F15S ACFT
cross-sectional_shape_style
SPHERICAL
cross_section_inside_diameter
1.000 INCHES NOMINAL IN
cross_section_outside_diameter
1.080 INCHES NOMINAL IN
material_document_and_classification
MIL-C-9084 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-01-406-6803
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -65.00 FAHRENHEIT AND 450.00 FAHRENHEIT DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-9084 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPHERICAL
•
CROSS-SECTIONAL LENGTH: 2.250 INCHES NOMINAL IN
•
CROSS SECTION INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 1.080 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING
-65.00 FAHRENHEIT AND 450.00 FAHRENHEIT DEGF
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-C-9084 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE
SPHERICAL
CROSS-SECTIONAL LENGTH
2.250 INCHES NOMINAL IN
CROSS SECTION INSIDE DIAMETER
1.000 INCHES NOMINAL IN
SPECIAL FEATURES
INNER PLY SHALL BE TYPE IV, STYLE128 YARN GLASS FABRIC PER MIL-C-9084; OUTER PLIES SHALL BE TYPE VII, STYLE 164 YARN PER MIL-C-9084;IMPREGNATION OFTHE INNER PLY SHALL BE SUCH THAT THE INSIDE DIA OF THE FINISHED, CURVED SLEEVE SHALL BE SMOOTH, WITH FULL COVERAGEOF WEAVE INTERSTICES
CROSS SECTION OUTSIDE DIAMETER
1.080 INCHES NOMINAL IN
END ITEM IDENTIFICATION
F15S ACFT
MATERIAL
GLASS AND RUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AD1199-8-9?
AD1199-8-9 is a SLEEVE,SEAL,COUPLER.
What parts can replace AD1199-8-9?
There are 2 known substitutes for AD1199-8-9: ST7M389-08-09, ST7M389-8-9. Substitute compatibility should be verified for your specific system.
What is the NSN for AD1199-8-9?
AD1199-8-9 is cataloged in the U.S. Government catalog under NSN 5330-01-406-6803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.