PartsTable
Technical Data Sheet
PartsTable / O-RING / AC180-213
AC180-213 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.199 INCHES NOMINAL IN, center_hole_diameter: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-004-7223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AC180-213
NSN: 5331-01-004-7223
FSC: 5331 — O-RING
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.199 INCHES NOMINAL IN
center_hole_diameter0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-004-7223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AC180-213 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
OUTSIDE DIAMETER: 1.199 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
OUTSIDE DIAMETER1.199 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ARP568-213MILG2 3652TYPE2Interchangeable
interchangeable cross-reference
interchangeable
AMS 7259Interchangeable
interchangeable cross-reference
interchangeable
20193PC37Interchangeable
interchangeable cross-reference
interchangeable
AS568-213MILG23652TY2CPInterchangeable
Same NIIN cross-reference
interchangeable
AS568-213MILG23652TY2Interchangeable
Same NIIN cross-reference
interchangeable
AC180-213CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AC180-213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AC180-213?
AC180-213 is a O-RING.
What parts can replace AC180-213?
There are 6 known substitutes for AC180-213: ARP568-213MILG2 3652TYPE2, AMS 7259, 20193PC37 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AC180-213?
AC180-213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-004-7223. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AC180-213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026