PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ABMIM-AT-C
ABMIM-AT-C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC NYLON, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.201 INCHES NOMINAL IN, overall_length: 0.500 INCHES NOMINAL IN, end_item_identification: LAV-25A2 UPGRADES, part_name_assigned_by_controlling_agency: MOUNT, CABLE TIE, ADHESIVE BACKED AND FASTENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-558-1898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ABMIM-AT-C
NSN: 5340-01-558-1898
FSC: 5340
CAGE: 06383 — PANDUIT CORP. (USA)
SPECIFICATIONS
materialPLASTIC NYLON
overall_width0.500 INCHES NOMINAL IN
overall_height0.201 INCHES NOMINAL IN
overall_length0.500 INCHES NOMINAL IN
end_item_identificationLAV-25A2 UPGRADES
part_name_assigned_by_controlling_agencyMOUNT, CABLE TIE, ADHESIVE BACKED AND FASTENED
NSN5340-01-558-1898
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ABMIM-AT-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC NYLON
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONLAV-25A2 UPGRADES
MATERIALPLASTIC NYLON
OVERALL WIDTH0.500 INCHES NOMINAL IN
OVERALL LENGTH0.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYMOUNT, CABLE TIE, ADHESIVE BACKED AND FASTENED
OVERALL HEIGHT0.201 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
433-1791Interchangeable
interchangeable cross-reference
interchangeable
ES8602-01Interchangeable
interchangeable cross-reference
interchangeable
SM-C-806052-1Interchangeable
interchangeable cross-reference
interchangeable
7561281-004Interchangeable
Same NIIN cross-reference
interchangeable
7561281-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ABMIM-AT-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ABMIM-AT-C?
ABMIM-AT-C is a BRACKET,MOUNTING.
What parts can replace ABMIM-AT-C?
There are 5 known substitutes for ABMIM-AT-C: 433-1791, ES8602-01, SM-C-806052-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ABMIM-AT-C?
ABMIM-AT-C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-558-1898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ABMIM-AT-C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026