PartsTable
Technical Data Sheet
Download PDF

AB935EP38 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AB935EP38: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 FASTENER, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, thread_length: 0.158 INCHES NOMINAL IN, fastener_length: 0.158 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-076-1827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AB935EP38
NSN: 5305-01-076-1827
FSC: 5305 — Screws
CAGE: 02310 — PATTONAIR USA INC DBA INCORA DIV UNISEAL DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 FASTENER
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
thread_length0.158 INCHES NOMINAL IN
fastener_length0.158 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
features_providedO RING AND WASHER
surface_treatmentPASSIVATE FASTENER
internal_drive_styleCROSS RECESS TYPE 1
NSN5305-01-076-1827
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AB935EP38 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.158 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.480 INCHES NOMINAL IN
•
THREAD LENGTH: 0.158 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FEATURES PROVIDED: O RING AND WASHER
•
HEAD STYLE: FLAT COUNTERSUNK
•
PRIMARY WASHER STYLE: FLAT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.158 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.480 INCHES NOMINAL IN
THREAD LENGTH0.158 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDO RING AND WASHER
HEAD STYLEFLAT COUNTERSUNK
PRIMARY WASHER STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.003 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE FASTENER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
12272671Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AB935EP38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AB935EP38?
AB935EP38 is a SCREW,ASSEMBLED WASHER.
What parts can replace AB935EP38?
There is 1 known substitute for AB935EP38: 12272671. Substitute compatibility should be verified for your specific system.
What is the NSN for AB935EP38?
AB935EP38 is cataloged in the U.S. Government catalog under NSN 5305-01-076-1827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AB935EP38

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.