PartsTable
Technical Data Sheet
Download PDF

AB801H0W — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AB801H0W: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.042 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.323 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN, thread_length: 0.287 INCHES MINIMUM IN, fastener_length: 0.391 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-275-6797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AB801H0W
NSN: 5305-01-275-6797
FSC: 5305 — Screws
CAGE: 02310 — PATTONAIR USA INC DBA INCORA DIV UNISEAL DIVISION (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.042 INCHES NOMINAL IN
thread_class3A A
head_diameter0.323 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
thread_length0.287 INCHES MINIMUM IN
fastener_length0.391 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
special_featuresUNDERCUT HEAD
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
features_providedFLAT WASHER AND O RING
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
NSN5305-01-275-6797
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AB801H0W · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.042 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.391 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.287 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
FEATURES PROVIDED: FLAT WASHER AND O RING
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.042 INCHES NOMINAL IN
FASTENER LENGTH0.391 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
THREAD LENGTH0.287 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
FEATURES PROVIDEDFLAT WASHER AND O RING
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESUNDERCUT HEAD
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
7010426-008Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AB801H0W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AB801H0W?
AB801H0W is a SCREW,MACHINE.
What parts can replace AB801H0W?
There is 1 known substitute for AB801H0W: 7010426-008. Substitute compatibility should be verified for your specific system.
What is the NSN for AB801H0W?
AB801H0W is cataloged in the U.S. Government catalog under NSN 5305-01-275-6797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AB801H0W