PartsTable
Technical Data Sheet
Download PDF

AB21-132 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

AB21-132: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING HUB, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-198-9626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AB21-132
NSN: 3020-01-198-9626
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 00141 — ROLLER BEARING CO OF AMERICA, INC DIV PIC DESIGN (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING HUB
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity132
style_designatorPROTRUDING HUB
surface_treatmentPASSIVATE OVERALL
face_nominal_width0.188 INCHES IN
hub_nominal_diameter0.500 INCHES FIRST END IN
hub_style_designatorPLAIN FIRST END
NSN3020-01-198-9626
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN AB21-132 MFR GEAR,SPUR
KEY FEATURES
•
FURNISHED ITEMS AND QUANTITY: 1 SETSCREW
•
BORE NOMINAL DIAMETER: 0.250 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.500 INCHES FIRST END IN
•
TEETH QUANTITY: 132
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.250 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
TECHNICAL CHARACTERISTICS
FURNISHED ITEMS AND QUANTITY1 SETSCREW
BORE NOMINAL DIAMETER0.250 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.500 INCHES FIRST END IN
TEETH QUANTITY132
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.250 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONE I DUPONT DE NUMOURS AND CO INC,DELRIN 15BDJW MFR REF SINGLE MATERIAL RESPONSE BODY
PITCH DIAMETER2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
0461D0001-20Reference document
Same NSN cross-reference
Reference document — Secondary reference
0461D0001Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AB21-132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AB21-132?
AB21-132 is a GEAR,SPUR.
What parts can replace AB21-132?
There are 2 known substitutes for AB21-132: 0461D0001-20, 0461D0001. Substitute compatibility should be verified for your specific system.
What is the NSN for AB21-132?
AB21-132 is cataloged in the U.S. Government catalog under NSN 3020-01-198-9626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AB21-132