PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AB0030585K46
AB0030585K46 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 3.245 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-8355, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AB0030585K46
NSN: 5330-00-559-8355
FSC: 5330
CAGE: 3NNX8 — BRIGHTON CROMWELL LLC (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter3.245 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-559-8355
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AB0030585K46 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.245 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.245 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2690Interchangeable
interchangeable cross-reference
interchangeable
705260Interchangeable
interchangeable cross-reference
interchangeable
AT-2690Interchangeable
interchangeable cross-reference
interchangeable
324216Interchangeable
interchangeable cross-reference
interchangeable
K2690Interchangeable
Same NIIN cross-reference
interchangeable
585K46Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AB0030585K46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AB0030585K46?
AB0030585K46 is a SEAL,PLAIN ENCASED.
What parts can replace AB0030585K46?
There are 8 known substitutes for AB0030585K46: 2690, 705260, AT-2690 and 5 more. Substitute compatibility should be verified for your specific system.
Is AB0030585K46 still available?
AB0030585K46 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AB0030585K46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026