PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AB001077452
AB001077452 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 0.938 INCHES NOMINAL IN, center_hole_diameter: 0.750 INCHES NOMINAL IN, cross-sectional_height: 0.094 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-6992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AB001077452
NSN: 5330-00-064-6992
FSC: 5330
CAGE: 52993 — AR BEE CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter0.938 INCHES NOMINAL IN
center_hole_diameter0.750 INCHES NOMINAL IN
cross-sectional_height0.094 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-064-6992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AB001077452 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.938 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.938 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL HEIGHT0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
177452Interchangeable
interchangeable cross-reference
interchangeable
4F90017-119BInterchangeable
interchangeable cross-reference
interchangeable
4F20040-113AInterchangeable
interchangeable cross-reference
interchangeable
0103020073Interchangeable
interchangeable cross-reference
interchangeable
41-3-6Interchangeable
interchangeable cross-reference
interchangeable
NMP329PC41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AB001077452?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AB001077452?
AB001077452 is a PACKING,PREFORMED.
What parts can replace AB001077452?
There are 25 known substitutes for AB001077452: 177452, 4F90017-119B, 4F20040-113A and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AB001077452?
AB001077452 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-6992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AB001077452

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026