AAV307-6MSRTD231S8 — BEARING,BALL,THRUST

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

AAV307-6MSRTD231S8: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP M50 OUTER RACE, bore_diameter: 1.4297 INCHES MINIMUM AND 1.4300 INCHES MAXIMUM IN, overall_width: 0.7834 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: SILVER PLATE CAGE 0.0005-0.0015 THK PER AMS-2412. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-160-9082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AAV307-6MSRTD231S8

NSN: 3110-01-160-9082
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)

SPECIFICATIONS

material	STEEL COMP M50 OUTER RACE
bore_diameter	1.4297 INCHES MINIMUM AND 1.4300 INCHES MAXIMUM IN
overall_width	0.7834 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
alignment_type	RIGID
surface_finish	GROUND
special_features	SILVER PLATE CAGE 0.0005-0.0015 THK PER AMS-2412
style_designator	4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE
end_item_identification	ACFT ENG F-101
overall_outside_diameter	3.1600 INCHES MINIMUM AND 3.1603 INCHES MAXIMUM IN
retainer_fabrication_method	MACHINED
standard_tolerance_designation	ABEC NO.5
thrust_directional_capability_designation	SINGLE
NSN	3110-01-160-9082

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: 4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE

•

THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE

•

OVERALL OUTSIDE DIAMETER: 3.1600 INCHES MINIMUM AND 3.1603 INCHES MAXIMUM IN

•

ALIGNMENT TYPE: RIGID

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
SURFACE FINISH	GROUND
STYLE DESIGNATOR	4 POINT BALL CONTACT, SPLIT INNER RING, SEPARABLE
OVERALL WIDTH	0.7834 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATION	SINGLE
OVERALL OUTSIDE DIAMETER	3.1600 INCHES MINIMUM AND 3.1603 INCHES MAXIMUM IN
ALIGNMENT TYPE	RIGID
SPECIAL FEATURES	SILVER PLATE CAGE 0.0005-0.0015 THK PER AMS-2412
END ITEM IDENTIFICATION	ACFT ENG F-101
STANDARD TOLERANCE DESIGNATION	ABEC NO.5

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 2

9961M53P03Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AAV307-6-102Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation + specific procedure

Ready to buy AAV307-6MSRTD231S8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AAV307-6MSRTD231S8?

AAV307-6MSRTD231S8 is a BEARING,BALL,THRUST.

What parts can replace AAV307-6MSRTD231S8?

There are 2 known substitutes for AAV307-6MSRTD231S8: 9961M53P03, AAV307-6-102. Substitute compatibility should be verified for your specific system.

What is the NSN for AAV307-6MSRTD231S8?

AAV307-6MSRTD231S8 is cataloged in the U.S. Government catalog under NSN 3110-01-160-9082. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AAV307-6MSRTD231S8 — BEARING,BALL,THRUST

Request a Quote — AAV307-6MSRTD231S8