The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SHIELD, bore_shape: STRAIGHT, bore_diameter: 0.4997 INCHES MINIMUM AND 0.5007 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-445-2597, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING SHIELD |
| bore_shape | STRAIGHT |
| bore_diameter | 0.4997 INCHES MINIMUM AND 0.5007 INCHES MAXIMUM IN |
| contact_angle | 25.0 DEGREES MAXIMUM |
| overall_width | 0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN |
| load_direction | ANGULAR |
| surface_finish | GROUND |
| shield_quantity | 2 |
| special_features | INNER RING OD BREAKOUT ONE SIDE,INTERNAL CLEARANCE MEASURED UNDER A 1 LB GAGE LOAD,STABILIZED FOR OPERATION AT 1000 DEG F LBS |
| style_designator | COUNTERBORED OUTER RING, NON-SEPARABLE |
| internal_clearance | 0.0005 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN |
| lubrication_material | LUBRICANT |
| NSN | 3110-00-445-2597 |
| OVERALL WIDTH | 0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN |
| SPECIAL FEATURES | INNER RING OD BREAKOUT ONE SIDE,INTERNAL CLEARANCE MEASURED UNDER A 1 LB GAGE LOAD,STABILIZED FOR OPERATION AT 1000 DEG F LBS |
| CONTACT ANGLE | 25.0 DEGREES MAXIMUM |
| LUBRICATION MATERIAL | LUBRICANT |
| SURFACE FINISH | GROUND |
| BORE SHAPE | STRAIGHT |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | ANGULAR |