The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.750 INCHES NOMINAL IN, outside_diameter: 1.469 INCHES NOMINAL IN, special_features: COUPLINGS ATTACHED W/2 BOLT FINGER TYPE CLAMPS, operating_pressure: 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the U.S.
Government catalog under NSN 4720-00-202-6945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AA59565-12-25
NSN:4720-00-202-6945 FSC:4720 — Hose and Flexible Tubing CAGE:58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
temp_rating
-40.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter
0.750 INCHES NOMINAL IN
outside_diameter
1.469 INCHES NOMINAL IN
special_features
COUPLINGS ATTACHED W/2 BOLT FINGER TYPE CLAMPS
operating_pressure
125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure
700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_condition
SMOOTH
media_for_which_designed
AIR SINGLE RESPONSE
hydrostatic_test_pressure
250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
measuring_method_and_length
300.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
nondefinitive_spec/std_data
1 CLASS
specification/standard_data
81348-ZZ-H-500 GOVERNMENT SPECIFICATION
NSN
4720-00-202-6945
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 300.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
•
TEMP RATING: -40.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER RUBBER IMPREGNATED WOVEN FABRIC AND 1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTSIDE DIAMETER: 1.469 INCHES NOMINAL IN
•
OPERATING PRESSURE: 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81348-ZZ-H-500 GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS
•
INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
300.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
TEMP RATING
-40.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATION
1ST LAYER RUBBER IMPREGNATED WOVEN FABRIC AND 1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC OR OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTSIDE DIAMETER
1.469 INCHES NOMINAL IN
OPERATING PRESSURE
125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA
81348-ZZ-H-500 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA
1 CLASS
INSIDE DIAMETER
0.750 INCHES NOMINAL IN
INSIDE SURFACE CONDITION
SMOOTH
SPECIAL FEATURES
COUPLINGS ATTACHED W/2 BOLT FINGER TYPE CLAMPS
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA59565-12-25?
AA59565-12-25 is a HOSE,NONMETALLIC.
What parts can replace AA59565-12-25?
There are 4 known substitutes for AA59565-12-25: A-A-59565-12-025, A-A-59565, 2343154700 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AA59565-12-25?
AA59565-12-25 is cataloged in the U.S. Government catalog under NSN 4720-00-202-6945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.