PartsTable
Technical Data Sheet
AA59487-1BL ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include construction: LAMINATED, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 4.660 INCHES NOMINAL IN, shackle_diameter: 0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN, shackle_clearance: 2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN, key_change_quantity: 5000. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-1645, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA59487-1BL
NSN: 5340-00-682-1645
FSC: 5340
CAGE: 58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
constructionLAMINATED
overall_width1.500 INCHES NOMINAL IN
overall_height4.660 INCHES NOMINAL IN
shackle_diameter0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
shackle_clearance2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
key_change_quantity5000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
NSN5340-00-682-1645
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AA59487-1BL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SHACKLE CLEARANCE: 2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SHACKLE DIAMETER: 0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
KEY CHANGE QUANTITY: 5000
CONSTRUCTION: LAMINATED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.500 INCHES NOMINAL IN
SHACKLE CLEARANCE2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SHACKLE DIAMETER0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
KEY CHANGE QUANTITY5000
OVERALL HEIGHT4.660 INCHES NOMINAL IN
CONSTRUCTIONLAMINATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
A-A-59487Upgraded Successor
successor cross-reference
successor
A-A-59486Upgraded Successor
successor cross-reference
successor
A-A-59487-2SSUpgraded Successor
successor cross-reference
successor
AA59486-2AS06S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS05S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS04S0E2SUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy AA59487-1BL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA59487-1BL?
AA59487-1BL is a PADLOCK.
What parts can replace AA59487-1BL?
There are 22 known substitutes for AA59487-1BL: A-A-59487, A-A-59486, A-A-59487-2SS and 19 more. Substitute compatibility should be verified for your specific system.
Is AA59487-1BL still available?
AA59487-1BL is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA59487-1BL