PartsTable
Technical Data Sheet
Download PDF

AA59486-2IB80303020 — PADLOCK SET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AA59486-2IB80303020: PADLOCK SET.

The PADLOCK SET is a the manufacturer industrial component. Key specifications include chain_length: 9.000 INCHES NOMINAL IN, construction: LAMINATED, overall_width: 1.750 INCHES NOMINAL IN, overall_height: 2.968 INCHES NOMINAL IN, padlock_quantity: 80, shackle_diameter: 0.303 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-682-1506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA59486-2IB80303020
NSN: 5340-00-682-1506
FSC: 5340 — Hardware, Commercial
CAGE: 58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
chain_length9.000 INCHES NOMINAL IN
constructionLAMINATED
overall_width1.750 INCHES NOMINAL IN
overall_height2.968 INCHES NOMINAL IN
padlock_quantity80
shackle_diameter0.303 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
shackle_clearance0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
surface_treatmentLACQUER OVERALL
key_change_quantity10000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
padlock_quantity_per_group30 AND 20
individual_group_keying_typeINDIVIDUALLY KEYED
NSN5340-00-682-1506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AA59486-2IB80303020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHACKLE CLEARANCE: 0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
SEPARATE PADLOCK GROUP QUANTITY: 3
•
KEY CHANGE QUANTITY: 10000
•
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
•
PADLOCK QUANTITY: 80
•
CHAIN LENGTH: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.968 INCHES NOMINAL IN
SHACKLE CLEARANCE0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
SEPARATE PADLOCK GROUP QUANTITY3
KEY CHANGE QUANTITY10000
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
PADLOCK QUANTITY80
OVERALL WIDTH1.750 INCHES NOMINAL IN
CHAIN LENGTH9.000 INCHES NOMINAL IN
PADLOCK QUANTITY PER GROUP30 AND 20
SURFACE TREATMENTLACQUER OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
13658626Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS21313-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILP17802STYLEAReference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-59486Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AA59486-2IB80303020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA59486-2IB80303020?
AA59486-2IB80303020 is a PADLOCK SET.
What parts can replace AA59486-2IB80303020?
There are 4 known substitutes for AA59486-2IB80303020: 13658626, MS21313-32, MILP17802STYLEA and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AA59486-2IB80303020?
AA59486-2IB80303020 is cataloged in the U.S. Government catalog under NSN 5340-00-682-1506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA59486-2IB80303020