PartsTable
Technical Data Sheet
Download PDF

AA55629-411 — NUT,PLAIN,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AA55629-411: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: CAP, nut_height: 0.340 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-757-7837, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA55629-411
NSN: 5310-00-757-7837
FSC: 5310 — Nuts and Washers
CAGE: 58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleCAP
nut_height0.340 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch32
nondefinitive_spec/std_data3 TYPE AND 15 STYLE
NSN5310-00-757-7837
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AA55629-411 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 15 STYLE
•
NUT HEIGHT: 0.340 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613,COMP 11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 15 STYLE
NUT HEIGHT0.340 INCHES NOMINAL IN
SURFACE TREATMENTOXIDE OVERALL
NUT STYLECAP
SUBSTITUTES & CROSS-REFERENCES 3
MS24679-411Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFN836Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-55629Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AA55629-411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA55629-411?
AA55629-411 is a NUT,PLAIN,CAP.
What parts can replace AA55629-411?
There are 3 known substitutes for AA55629-411: MS24679-411, FFN836, A-A-55629. Substitute compatibility should be verified for your specific system.
What is the NSN for AA55629-411?
AA55629-411 is cataloged in the U.S. Government catalog under NSN 5310-00-757-7837. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA55629-411