PartsTable
Technical Data Sheet
Download PDF

AA55623-45 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AA55623-45: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.330 INCHES MINIMUM IN, screw_material: PLASTIC POLYHEXAMETHYLENE AMIDE, fastener_length: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-708-7719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA55623-45
NSN: 5305-00-708-7719
FSC: 5305 — Screws
CAGE: 58536 — FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.330 INCHES MINIMUM IN
screw_materialPLASTIC POLYHEXAMETHYLENE AMIDE
fastener_length0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-708-7719
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AA55623-45 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.330 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.330 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 4
FF-S-92BReference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-55623Reference document
Same NSN cross-reference
Reference document — Identification reference
330-2103-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS18211-21CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AA55623-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA55623-45?
AA55623-45 is a SCREW,MACHINE.
What parts can replace AA55623-45?
There are 4 known substitutes for AA55623-45: FF-S-92B, A-A-55623, 330-2103-000 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AA55623-45?
AA55623-45 is cataloged in the U.S. Government catalog under NSN 5305-00-708-7719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA55623-45