PartsTable
Technical Data Sheet
Download PDF

AA10764-01 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AA10764-01: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC BODY, overall_height: 1.375 INCHES NOMINAL IN, sealing_method: COMPRESSION, mounting_method: LIP, style_designator: THRU-HOLE, base_outside_diameter: 2.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-196-6903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AA10764-01
NSN: 5340-01-196-6903
FSC: 5340 — Hardware, Commercial
CAGE: 24664 — JONAL LABORATORIES INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC BODY
overall_height1.375 INCHES NOMINAL IN
sealing_methodCOMPRESSION
mounting_methodLIP
style_designatorTHRU-HOLE
base_outside_diameter2.812 INCHES NOMINAL IN
opening_inside_diameter0.438 INCHES NOMINAL IN
NSN5340-01-196-6903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AA10764-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING METHOD: COMPRESSION
•
OPENING INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
MOUNTING METHOD: LIP
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE OUTSIDE DIAMETER: 2.812 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.375 INCHES NOMINAL IN
SEALING METHODCOMPRESSION
OPENING INSIDE DIAMETER0.438 INCHES NOMINAL IN
MOUNTING METHODLIP
STYLE DESIGNATORTHRU-HOLE
BASE OUTSIDE DIAMETER2.812 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC BODY
SUBSTITUTES & CROSS-REFERENCES 2
9050171Reference document
Same NSN cross-reference
Reference document — Secondary reference
4057-84 ITEM 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AA10764-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AA10764-01?
AA10764-01 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace AA10764-01?
There are 2 known substitutes for AA10764-01: 9050171, 4057-84 ITEM 19. Substitute compatibility should be verified for your specific system.
What is the NSN for AA10764-01?
AA10764-01 is cataloged in the U.S. Government catalog under NSN 5340-01-196-6903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AA10764-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.