PartsTable
Technical Data Sheet
A9986 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MITT,SOFTBALL,FIRST BASEMAN'S is a the manufacturer industrial component. Key specifications include material: CORK, special_features: LEATHER MITT HAS A SINGLE POST WEB PATTERN; WRIST ADJUSTMENT, fabrication_method: SOLID, cross-sectional_width: 0.094 INCHES NOMINAL IN, cross-sectional_height: 0.266 INCHES NOMINAL IN, supplementary_features: DESIGNED FOR FASTPITCH; FOR LEFT HAND THROW; SIZE:12 INCH IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-2657, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A9986
NSN: 5330-00-202-2657
FSC: 5330
CAGE: 78940 — UNITED AIR FILTER, INC. (USA)
SPECIFICATIONS
materialCORK
special_featuresLEATHER MITT HAS A SINGLE POST WEB PATTERN; WRIST ADJUSTMENT
fabrication_methodSOLID
cross-sectional_width0.094 INCHES NOMINAL IN
cross-sectional_height0.266 INCHES NOMINAL IN
supplementary_featuresDESIGNED FOR FASTPITCH; FOR LEFT HAND THROW; SIZE:12 INCH IN
hand_for_which_designedRIGHT
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-202-2657
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A9986 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL WIDTH: 0.094 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT: 0.266 INCHES NOMINAL IN
MATERIAL: CORK
FABRICATION METHOD: SOLID
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.094 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.266 INCHES NOMINAL IN
MATERIALCORK
CROSS-SECTIONAL WIDTH0.094 INCHES NOMINAL IN
MATERIALCORK
FABRICATION METHODSOLID
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CROSS-SECTIONAL HEIGHT0.266 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
A1883Interchangeable
Mitt,softball,first Baseman's
interchangeable
1265088Interchangeable
Mitt,softball,first Baseman's
interchangeable
09073XBMInterchangeable
Mitt,softball,first Baseman's
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A9986?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A9986?
A9986 is a MITT,SOFTBALL,FIRST BASEMAN'S.
What parts can replace A9986?
There are 3 known substitutes for A9986: A1883, 1265088, 09073XBM. Substitute compatibility should be verified for your specific system.
What is the NSN for A9986?
A9986 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-2657. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A9986