PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A9967
A9967 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 2.252 INCHES NOMINAL IN, center_hole_diameter: 1.625 INCHES NOMINAL IN, end_item_identification: WINCH,HAND OPERATED, cross_section_outside_diameter: 0.313 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: SEAL,OIL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-699-5355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A9967
NSN: 5330-01-699-5355
FSC: 5330
CAGE: 12437 — THERN INC (USA)
SPECIFICATIONS
peripheral_diameter2.252 INCHES NOMINAL IN
center_hole_diameter1.625 INCHES NOMINAL IN
end_item_identificationWINCH,HAND OPERATED
cross_section_outside_diameter0.313 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySEAL,OIL
NSN5330-01-699-5355
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A9967 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.252 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.252 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.313 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,OIL
END ITEM IDENTIFICATIONWINCH,HAND OPERATED
CENTER HOLE DIAMETER1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A9518Interchangeable
interchangeable cross-reference
interchangeable
A10777A-0514Interchangeable
interchangeable cross-reference
interchangeable
A1612Interchangeable
interchangeable cross-reference
interchangeable
C4401Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A9967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A9967?
A9967 is a PACKING,PREFORMED.
What parts can replace A9967?
There are 4 known substitutes for A9967: A9518, A10777A-0514, A1612 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A9967?
A9967 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-699-5355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A9967

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026