PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A9782M110PC34
A9782M110PC34 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 3.751 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-006-9480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A9782M110PC34
NSN: 5330-01-006-9480
FSC: 5330
CAGE: 95995 — WALWORTH CO THE (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
temp_rating225.0 FAHRENHEIT DEGF
housing_bore_diameter3.751 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter2.562 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-01-006-9480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A9782M110PC34 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: RECESSED
•
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
•
TEMP RATING: 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.562 INCHES NOMINAL IN
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
TEMP RATING225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.562 INCHES NOMINAL IN
SEAL WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1894Interchangeable
interchangeable cross-reference
interchangeable
8108A0440-17Interchangeable
interchangeable cross-reference
interchangeable
UCSL1000-3D345Interchangeable
interchangeable cross-reference
interchangeable
CVC10-1K3KVInterchangeable
interchangeable cross-reference
interchangeable
PE9175Interchangeable
interchangeable cross-reference
interchangeable
1250-1786Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A9782M110PC34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A9782M110PC34?
A9782M110PC34 is a SEAL,PLAIN ENCASED.
What parts can replace A9782M110PC34?
There are 15 known substitutes for A9782M110PC34: 1894, 8108A0440-17, UCSL1000-3D345 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A9782M110PC34?
A9782M110PC34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-006-9480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A9782M110PC34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026