A8942-000170: CABLE ASSEMBLY,SPECIAL PURPOSE,E.
CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include temp_rating: -40.0 CELSIUS AND 68.0 CELSIUS DEGC, overall_length: 180.00 INCHES IN, termination_type: PIN ALL ENDS ALL CONDUCTORS, conductor_quantity: 37, end_item_identification: THREAT EMITTER, part_name_assigned_by_controlling_agency: CABLE,ETHERNET-RS422,180". This part is cataloged in the U.S.
Government catalog under NSN 5995-01-601-9711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| temp_rating | -40.0 CELSIUS AND 68.0 CELSIUS DEGC |
| overall_length | 180.00 INCHES IN |
| special_markings | THE UNIT SHALL BE PERMANENTLY AND LEGIBLY MARKED IAW MIL-STD-130 (MANUFACTURER'S CAGE CODE & PART NUMBER) PER SAE-AS478 METHOD 30, METHOD 3B OR METHOD 15 |
| termination_type | PIN ALL ENDS ALL CONDUCTORS |
| conductor_quantity | 37 |
| end_item_identification | THREAT EMITTER |
| part_name_assigned_by_controlling_agency | CABLE,ETHERNET-RS422,180" |
| NSN | 5995-01-601-9711 |
| TERMINATION TYPE | PIN ALL ENDS ALL CONDUCTORS |
| TEMP RATING | -40.0 CELSIUS AND 68.0 CELSIUS DEGC |
| OVERALL LENGTH | 180.00 INCHES IN |
| SPECIAL TEST FEATURES | CABLE SHALL BE DESIGNED TO WITHSTAND STORAGE TEMPERATURES OF -40C TO 68C WITHOUT SUFFERING DEGRADATION AND LOSS OF OPERATION;CABLE JACKET SHALL BE DESIGNED TO WITHSTAND THE EFFECTS OF SOLAR LOADING PER MIL-STD-810 METHOD 505.5 (1120 W/M2) WITHOUT DAMAGING DEGRADATION RESULTING IN LOSS OF PERFORMANCE;CABLE SHALL BE ABLE TO WITHSTAND EFFECTS OF WIND DRIVEN RAIN AT A RATE OF 2" PER HOUR AND A WIND VELOCITY OF 30 KNOTS AT ANY ORIENTATION ENCOUNTERED AND CAPABLE OF SITTING IN STANDING WATER FOR EXTENDED PERIODS WITHOUT DEGRADATION OR LOSS OF PERFORMANCE; CONNECTORS WILL NOT BE SUBJECTED TO STANDING WATER;CABLE SHALL WITHSTAND EFFECTS OF BLOWING SAND AND DUST AT A WIND VELOCITY OF 35MPH;CABLE SHALL BE DESIGNED TO RESIST EFFECTS OF SALT SPRAY ENVIRONMENT,FUNGUS, BIRDS AND INSECTS W |
| CONDUCTOR QUANTITY | 37 |
| SUPPLEMENTARY FEATURES | INSULATED 22-24 GUAGE WIRE SHALL BE STRANDED TINNED COPPER; DRAIN WIRE SHALL BE 22-26 GAUGE STRANDED TINNED COPPER; THE 2 PAIR SHIELD SHALL PROVIDE 100% COVERAGE; OVERALL SHIELDS SHALL BE TINNED COPPER BRAID PROVIDING 85% COVERAGE WITH 1 SHIELD AND APPROXIMATELY 95% COVERAGE WITH THE 2ND SHIELD;NOMINAL IMPEDENCE OF PAIRS: 100 OHMS |
| SPECIAL FEATURES | ITEM IS A CABLE MADE UP OF 7 BUNDLES OF 2 TWISTED PAIR CABLES THAT HAVE A DRAIN WIRE, ALUMINUM FOIL SHIELD, AND A JACKET OVER THE 2 TWISTED PAIRS; THE 7 BUNDLES HAVE 2 TINNED COPPER BRAID SHIELDS COVERED WITH AN OVERALL JACKET; THE TWISTED PAIR BUNDLES SHALL BE CAPABLE OF MEETING ETHERNET CAT 5E REQUIREMENTS AND SUPPORT A MINIMUM OF 100 M-BIT FULL DUPLEX COMMUNICATIONS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE,ETHERNET-RS422,180" |
| END ITEM IDENTIFICATION | THREAT EMITTER |
| SPECIAL MARKINGS | THE UNIT SHALL BE PERMANENTLY AND LEGIBLY MARKED IAW MIL-STD-130 (MANUFACTURER'S CAGE CODE & PART NUMBER) PER SAE-AS478 METHOD 30, METHOD 3B OR METHOD 15 |
No substitute or cross-reference records for this part.