PartsTable
Technical Data Sheet
PartsTable / MRO / A8428
A8428 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,THERMAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.031 INCHES NOMINAL IN, body_length: 0.625 INCHES MAXIMUM IN, hole_diameter: 0.188 INCHES NOMINAL IN, inclosure_type: ENCAPSULATED, terminal_length: 1.000 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-452-5270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A8428
NSN: 5310-00-452-5270
FSC: 5310
CAGE: K0673 — PAGE AEROSPACE LIMITED (GBR)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.031 INCHES NOMINAL IN
body_length0.625 INCHES MAXIMUM IN
hole_diameter0.188 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
terminal_length1.000 INCHES MINIMUM IN
overall_diameter0.312 INCHES NOMINAL IN
style_designatorROD
terminal_diameter0.016 INCHES NOMINAL IN
body_outside_diameter0.125 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
zero_power_resistance100.000 KILOHMS
NSN5310-00-452-5270
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A8428 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.031 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.031 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALSTEEL CORROSION RESISTING OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A8428Interchangeable
interchangeable cross-reference
interchangeable
7350-0008-001Interchangeable
interchangeable cross-reference
interchangeable
2036614Interchangeable
interchangeable cross-reference
interchangeable
C405Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A8428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A8428?
A8428 is a RESISTOR,THERMAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace A8428?
There are 4 known substitutes for A8428: A8428, 7350-0008-001, 2036614 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A8428?
A8428 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-452-5270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A8428

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026