A7663 — TELETYPEWRITER SUBASSEMBLY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A7663: TELETYPEWRITER SUBASSEMBLY.

The TELETYPEWRITER SUBASSEMBLY is a the manufacturer industrial component. Key specifications include body_width: 0.598 INCHES MAXIMUM IN, body_height: 0.140 INCHES MAXIMUM IN, body_length: 1.220 INCHES MAXIMUM IN, bit_quantity: 4096, features_provided: HERMETICALLY SEALED AND MONOLITHIC AND BIPOLAR AND 3-STATE OUTPUT AND PROGRAMMABLE, output_logic_form: P-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-822-5756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A7663

NSN: 5910-00-822-5756
NIINs: 008225756, 010135548, 011584845
FSC: 5910 — Capacitors
CAGE: 05584 — AUTODYNE MANUFACTURING CO INC (USA)

SPECIFICATIONS

body_width	0.598 INCHES MAXIMUM IN
body_height	0.140 INCHES MAXIMUM IN
body_length	1.220 INCHES MAXIMUM IN
bit_quantity	4096
features_provided	HERMETICALLY SEALED AND MONOLITHIC AND BIPOLAR AND 3-STATE OUTPUT AND PROGRAMMABLE
output_logic_form	P-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC
precious_material	GOLD
inclosure_material	GLASS AND METAL
memory_device_type	ROM
storage_temp_range	-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range	+0.0 TO 70.0 CELSIUS DEGC
input_circuit_pattern	13 INPUT
NSN	5910-00-822-5756

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: PLATE,FLAT,METAL FOR CAPACITOR,FIXED,MICA DIELECTRIC W/4 0.140 IN. DIAMETER MTG HOLES @EQUALLY SPACED AT 50 DEG TOLERANCE BETWEEN ANY TWO HOLES NOT TO EXCEED 0.2 DEG MATL,INSULATION SHEET,ELEC,NATURAL MUSCOVITE MICA,TYPE NMSS 0.006 PORM 0.001 IN. THICK PER HH-I-536 SILVER COATING BOTH SIDES LEAVING 0.188 IN. MARGIN AROUND ALL HOLES AND EDGES TESTED AT 5000 VDC VDC

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

PLATE,FLAT,METAL FOR CAPACITOR,FIXED,MICA DIELECTRIC W/4 0.140 IN. DIAMETER MTG HOLES @EQUALLY SPACED AT 50 DEG TOLERANCE BETWEEN ANY TWO HOLES NOT TO EXCEED 0.2 DEG MATL,INSULATION SHEET,ELEC,NATURAL MUSCOVITE MICA,TYPE NMSS 0.006 PORM 0.001 IN. THICK PER HH-I-536 SILVER COATING BOTH SIDES LEAVING 0.188 IN. MARGIN AROUND ALL HOLES AND EDGES TESTED AT 5000 VDC VDC

SUBSTITUTES & CROSS-REFERENCES 2

306252Reference document

Same NSN cross-reference

Reference document — Secondary reference

548-8716-003Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A7663?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A7663?

A7663 is a TELETYPEWRITER SUBASSEMBLY. It is classified as a MRO (MRO_GENERAL).

What parts can replace A7663?

There are 2 known substitutes for A7663: 306252, 548-8716-003. Substitute compatibility should be verified for your specific system.

What is the NSN for A7663?

A7663 is cataloged in the U.S. Government catalog under NSN 5910-00-822-5756. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A7663 — TELETYPEWRITER SUBASSEMBLY

Request a Quote — A7663