PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A7265REVA
A7265REVA ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: ENGINE, AIRCRAFT, F-108 (CFM-56, KC-135A) A, cross-sectional_thickness: 33.047 INCHES NOMINAL IN, material_document_and_classification: AMS5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-180-2767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A7265REVA
NSN: 5330-01-180-2767
FSC: 5330
CAGE: 15284 — EATON CORPORATION DIV FED (USA)
SPECIFICATIONS
end_item_identificationENGINE, AIRCRAFT, F-108 (CFM-56, KC-135A) A
cross-sectional_thickness33.047 INCHES NOMINAL IN
material_document_and_classificationAMS5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-180-2767
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A7265REVA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 33.047 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATIONENGINE, AIRCRAFT, F-108 (CFM-56, KC-135A) A
CROSS-SECTIONAL THICKNESS33.047 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
72FInterchangeable
interchangeable cross-reference
interchangeable
BB14WPJGRWFInterchangeable
interchangeable cross-reference
interchangeable
72-65Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296 TY3SEAInterchangeable
interchangeable cross-reference
interchangeable
1266Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A7265REVA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A7265REVA?
A7265REVA is a GASKET.
What parts can replace A7265REVA?
There are 24 known substitutes for A7265REVA: 72F, BB14WPJGRWF, 72-65 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A7265REVA?
A7265REVA is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-180-2767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A7265REVA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026