PartsTable
Technical Data Sheet
Download PDF

A71913 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A71913: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: PLASTIC, POLYETHYLENE (PP) OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, thread_class: 1A A, thread_length: 0.190 INCHES NOMINAL IN, fastener_length: 0.190 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-379-0541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A71913
NSN: 5305-01-379-0541
FSC: 5305 — Screws
CAGE: 28666 — THYSSENKRUPP ROTHE ERDE USA INC. (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP) OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
thread_class1A A
thread_length0.190 INCHES NOMINAL IN
fastener_length0.190 INCHES NOMINAL IN
special_features2A OR 3A OPTIONAL CLASSES FOR THREADS A
thread_directionRIGHT-HAND
width_across_flats0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
NSN5305-01-379-0541
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A71913 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.190 INCHES NOMINAL IN
•
THREAD LENGTH: 0.190 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390 TY 1 CL L MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FASTENER LENGTH0.190 INCHES NOMINAL IN
THREAD LENGTH0.190 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390 TY 1 CL L MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURES2A OR 3A OPTIONAL CLASSES FOR THREADS A
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
T5-58P1B ITEM 24Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A71913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A71913?
A71913 is a SETSCREW.
What parts can replace A71913?
There is 1 known substitute for A71913: T5-58P1B ITEM 24. Substitute compatibility should be verified for your specific system.
What is the NSN for A71913?
A71913 is cataloged in the U.S. Government catalog under NSN 5305-01-379-0541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A71913